Model T32335 (Mfd. Since 11/20)
-23-
SECTION 6: MAINTENANCE
Daily Maintenance
•
Open drain valve to drain any condensation.
•
Test function of safety relief valve and clear
any obstructions.
Do not touch compressor
head or discharge line
during use or immediately
after compressor is active.
These hot parts may cause
burns. Allow compressor
to cool before handling.
Eye injury hazard! Always
wear safety glasses when
maintaining pressurized air
system.
Semi-Annual Maintenance
•
Check hoses/connections for leaks. If soapy
water at suspected leak creates bubbles, air
is escaping. Repair or replace affected parts.
Do not use flammable
cleanser to clean machine.
Compressor components
often produce sparks that
could ignite once machine
is connected to power and
turned ON.
The Model T32335 is an oil-free air compres-
sor, so no lubrication is necessary. Refer to the
instructions of any attached air tools to determine
if they require air line lubrication before they are
connected.
Lubrication
Compressor will turn ON
automatically when pres-
sure switch is set to AUTO.
To reduce risk of shock/
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Releasing air through safety relief valve or
drain valve can be extremely loud. Protect
hearing with ANSI-approved hearing
protection when testing/draining valves.
Weekly Maintenance
•
Check air filter.
•
Clean/vacuum dust buildup off compressor.
•
Damaged safety relief valve, pressure switch,
or drain valve.
•
Worn or damaged wires, cords, and plugs.
•
Tank rust/corrosion.
•
Any other unsafe condition.
Schedule
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the following
items, and fix the problem before continuing
operations:
Summary of Contents for QUIET Series
Page 40: ......
