Grizzly PSJ-M2 gen3, User Manual

Page: 2 / 11

Content:
1) GEN.3 news overview
2) Basic information
3) Function overview
4) Technical parameters
5) PSJ-M2 installation
6) Fire modes and settings
7) Troubleshooting
8) Package content
1. GEN.3 news overview

easier unit installation
 easier magnet installation, doesn´t matter on magnet‘s polarity

lower energy consumption, from 3,9mA
 unit useable up to spring M200 and rate of fire 99rpm
 longer wiring, suitable for all weapon types
 rate of fire setting
 switchable active brake
 adjustable power of active brake
 usable for batteries up to 4S – 16,8V
 added screw for unit attach into gearbox
 new, thicker isolation foil against short circuit
 possible usage of dual sector gears
 varnish coated to protect aganist short circuit
 service conector
2. Basic information
New generation of PSJ processor unit brings many new functions and easier installation. All the great function of
previous generation are kept - completely contactless switching by magnets combined with powerfull MOSFET
cooled by whole gearbox, active break fully functional in any mode set, programmable burst. Plus you will find new
switchable active break that works in all fire modes, new rate of fire setting and lower energy consumption from
3,9mA and many more new functions.
This unit is suitable for all AEG replicas with gearbox version II. It was tested in gearboxes of following
manufacturers*:
AimTop, APS, ASG Ultimate, Cyma, DBoys, Guarder, RetroArms, SHS, SRC
*Every manufacturer inovates their products in time, so there is possibility, that our tested gearbox is different from yours. However this only
means, that your installation might require some minor adjustments of unit or gearbox, see figure 4.2.
3. Functions overview
3.1. Fire modes

6 preset fire modes

allows you to set burst mode from 1 up to 255 shots on one trigger press, this setting works in all modes
containing burst

automatically switches from burst to full auto without any delay

modes are fully programmable by trigger itself (see figure 5.2.)
3.2. Rate of fire

allows you to set delay between two following shots

allows smooth rate of fire setting

programmable by trigger (see figure 5.2.)