Model G1023RL Series (Mfd. Since 12/11)
-21-
11. Mount the switch brace, as shown in Figure
17, using the pre-installed table mounting fas-
teners on the top end and the switch mount-
ing fasteners on the bottom end.
12. Attach the latch to the motor cover with (2)
#8-32 x
3
⁄
8
" Phillips head screws and (2)
#8-32 hex nuts, as shown in
Figure 18.
Figure 18. Latch installed.
Figure 17. Switch bracket installed.
Fasteners
13. Place the motor cover on the cabinet, line up
the hinges, and tap the hinge pins into place
with a hammer, as shown in
Figure 19.
Figure 19. Motor cover installed.
14. Mount the fence resting brackets with (4)
M5-.8 x 8 button head cap screws, as shown
in
Figure 20.
x 2
15. Mount the dust port onto the cabinet with
the (4) pre-installed tap screws, as shown in
Figure 21.
Figure 21. Dust port installed.
x 4
16. Thread the handwheel handle into the
handwheel and tighten it (see
Figure 22).
Figure 22. Handle installed on handwheel.
Handle
Figure 20. Fence resting brackets installed.
x 4
