-34-
Model G0920 (Mfd. Since 10/20)
Elevation Leadscrew & Slides
Lubrication Type .........Model T28500 (Dry Lube)
Oil Amount ......................................... As Needed
Check/Add Frequency .......................... 6 Months
Lubricate the elevation leadscrew and slides with
dry lubrication every six months. Clean the screw
and slides (see
Figure 51), then apply lubrication
on screw threads and slides. Move the drum up
and down to spread the lubrication thoroughly.
Lubrication
The bearings on the Model G0920 have been
lubricated and sealed at the factory. No other care
of these bearings is necessary unless they need
replacement.
The feed belt bushings should be lubricated daily
while the elevation leadscrew and slides should
be lubricated periodically, depending on usage.
See below for some lubrication products that
Grizzly offers.
Bushings
Lubrication Type ............ Model T26685 (ISO 32)
Oil Amount ......................................... As Needed
Check/Add Frequency ................................. Daily
Oil the bushings on each end of the conveyor belt
feed rollers (see
Figure 50).
Figure 50. Bushing lubrication locations.
Bushings
(2 of 4)
Figure 51. Elevation lubrication locations.
Elevation
Leadscrew
Elevation Slide
(1 of 2)
T26685—ISO 32 Moly-D Machine Oil, 1 Gal.
T23963—ISO 32 Moly-D Machine Oil, 5 Gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions. Buy in
bulk and save with 5-gallon quantities.
Figure 48. ISO 32 machine oil.
T26685
T23963
T28500—3-In-One Dry To Touch Dry Lube
3-In-One
®
Dry Lube reduces wear and friction on
your tools and equipment. Plus, it protects metal
parts to keep your tools and equipment in better
working order.
Figure 49. 3-In-One
®
Dry To Touch Lube.
Avoid using excess lubrication. Too much lubricant
attracts sawdust and will clog the belt bushings.
Summary of Contents for G0920
Page 60: ......
