-20-
Model G0920 (Mfd. Since 10/20)
Figure 22. Mounting block installed correctly.
Pre-Installed
Shoulder Screw
Note:
Pre-installed shoulder screws in
mounting blocks should face away from other
mounting block (see
Figure 22).
21. Repeat Step 20 with remaining table mount-
ing bracket.
22. Attach (2) table mounting brackets to table
frame under conveyor table with (8) M8-1.25
x 16 cap screws, 8mm lock washers, and
8mm flat washers (see
Figure 23).
23. Attach (2) right table folding brackets to right
mounting blocks as shown in
Figure 24 with
(2) M10-1.5 x 65 shoulder screws, 10mm flat
washer, and M10-1.5 lock nut.
Figure 24. Right table folding bracket installed.
Right
Mounting Block
Right
Folding Bracket
24. Repeat Step 23 with (2) left table folding
brackets.
25. Attach (2) extension tables to folding brack-
ets with (8) M8-1.25 x 20 carriage bolts,
8mm flat washers, 8mm lock washers, and
M8-1.25 hex nuts (see
Figure 25).
Figure 23. Table mounting bracket attached to
table frame.
x 2
x 8
Table
Mounting Bracket
(1 of 2)
Conveyor Table
Figure 25. Extension tables installed.
Folding Bracket
(1 of 4)
x 8
Extension Table
(1 of 2)
Summary of Contents for G0920
Page 60: ......
