Model G0900 (Mfd. Since 03/20)
-37-
Push Sticks Steps
Figure 50. Template for a basic shop-made push stick (not shown at actual size).
When used correctly, push sticks reduce the risk
of injury by keeping hands away from the cutter. In
the event of an accident, a push stick can absorb
damage that would have otherwise happened to
hands or fingers. Use push sticks whenever your
hands will get within 12" of the cutter. To maintain
control when shaping large workpieces, start by
feeding with your hands then use push sticks to
finish the operation, so your hands are not on the
end of the workpiece as it passes through the
cutter.
Feeding: Place the notched end of the push stick
against the end of the workpiece (see
Figure
50), and move the workpiece into the cutter with
steady downward and forward pressure.
Making Push Sticks
90º
Cut here to
push
1
⁄
4
" stock
Cut here to push
1
⁄
2
" stock
Notch for placing on
corners of workpieces
15
3
/
4
" Minimum Length
MATERIAL: Only use
hardwood, sturdy plywood,
or high-density plastic. Do
not use softwood that may
break under pressure or
metal that can break teeth
from the blade!
SANDING: Sand
edges to remove
rough edges and
increase comfort.
SIZING: Push stick
must be at least 15
3
⁄
4
"
long. Use
1
⁄
2
"–
3
⁄
4
" thick
material.
Notch to help
prevent hand
from slipping
1
⁄
2
" Grid
Supporting: A second push stick can be used
to keep the workpiece firmly against the fence
while cutting. When using this method, only apply
pressure before the cutter; otherwise, pushing
the workpiece against or behind the cutter will
increase the risk of kickback.
Making a Push Stick
Use this template to make
your own push stick.
Figure 49. Side view of push stick in use.
Summary of Contents for G0900
Page 68: ......
