-44-
Model G0893 (Mfd. Since 03/19)
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Labels & Cosmetics
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at [email protected]
DANGER!
WARNING!
WARNING!
Use this guard for all
operations possible, and
immediately reinstall it
following operations that
require its removal.
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operator’s
hands contacting the
cutterhead while cutting.
Always wear safety
glasses and a
respirator when
using this machine.
Disconnect power
before adjustments,
maintenance, or
service.
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
DANGER
WARNING
CAUTION
GRIZZLY LOGO RED
COLOR CODES
G0821 Machine Labels
(11.25.16)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at [email protected]
DANGER!
WARNING!
WARNING!
Use this guard for all
operations possible, and
immediately reinstall it
following operations that
require its removal.
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operator’s
hands contacting the
cutterhead while cutting.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
MODEL G0821
6" BENCHTOP JOINTER
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
Date
Mfd. for Grizzly in China
S/N
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
e
r
o
f
e
b
r
e
w
o
p
t
c
e
n
n
o
c
s
i
d
d
n
a
F
F
O
r
o
t
o
m
n
r
u
T
.
0
1
changing inserts, adjusting fence, or servicing.
t
n
e
v
e
r
p
o
t
w
o
h
d
n
a
s
d
r
a
z
a
h
"
k
c
a
b
k
c
i
k
"
f
o
e
r
a
w
a
e
B
.
1
1
them.
y
n
a
r
o
,
s
t
o
n
k
e
s
o
o
l
,
s
k
c
a
r
c
h
t
i
w
s
d
r
a
o
b
t
n
i
o
j
t
o
n
o
D
.
2
1
defects.
.
s
n
o
i
t
a
c
o
l
t
e
w
n
i
e
s
u
r
o
n
i
a
r
o
t
e
s
o
p
x
e
T
O
N
O
D
.
3
1
.
e
l
b
a
t
d
n
a
e
c
n
e
f
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
t
r
o
p
p
u
s
s
y
a
w
l
A
.
4
1
Never attempt any operation free-handed.
.
n
o
i
t
a
t
o
r
d
a
e
h
r
e
t
t
u
c
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
d
e
e
f
s
y
a
w
l
A
.
5
1
Never move workpiece backward while feeding.
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
6
1
users; restrict access or disable machine when
unattended.
these lines
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
DANGER!
WARNING!
WARNING!
Use this guard for all
operations possible, and
immediately reinstall it
following operations that
require its removal.
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operator’s
hands contacting the
cutterhead while cutting.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Date
Mfd. for Grizzly in China
S/N
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
e
r
o
f
e
b
r
e
w
o
p
t
c
e
n
n
o
c
s
i
d
d
n
a
F
F
O
r
o
t
o
m
n
r
u
T
.
0
1
changing inserts, adjusting fence, or servicing.
t
n
e
v
e
r
p
o
t
w
o
h
d
n
a
s
d
r
a
z
a
h
"
k
c
a
b
k
c
i
k
"
f
o
e
r
a
w
a
e
B
.
1
1
them.
y
n
a
r
o
,
s
t
o
n
k
e
s
o
o
l
,
s
k
c
a
r
c
h
t
i
w
s
d
r
a
o
b
t
n
i
o
j
t
o
n
o
D
.
2
1
defects.
.
s
n
o
i
t
a
c
o
l
t
e
w
n
i
e
s
u
r
o
n
i
a
r
o
t
e
s
o
p
x
e
T
O
N
O
D
.
3
1
.
e
l
b
a
t
d
n
a
e
c
n
e
f
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
t
r
o
p
p
u
s
s
y
a
w
l
A
.
4
1
Never attempt any operation free-handed.
.
n
o
i
t
a
t
o
r
d
a
e
h
r
e
t
t
u
c
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
d
e
e
f
s
y
a
w
l
A
.
5
1
Never move workpiece backward while feeding.
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
6
1
users; restrict access or disable machine when
unattended.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Cutterhead
exposed
between
these lines
G0821 Machine Labels
(11.25.16)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
MODEL G0821
6" BENCHTOP JOINTER
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
Date
Mfd. for Grizzly in China
S/N
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
e
r
o
f
e
b
r
e
w
o
p
t
c
e
n
n
o
c
s
i
d
d
n
a
F
F
O
r
o
t
o
m
n
r
u
T
.
0
1
changing inserts, adjusting fence, or servicing.
t
n
e
v
e
r
p
o
t
w
o
h
d
n
a
s
d
r
a
z
a
h
"
k
c
a
b
k
c
i
k
"
f
o
e
r
a
w
a
e
B
.
1
1
them.
y
n
a
r
o
,
s
t
o
n
k
e
s
o
o
l
,
s
k
c
a
r
c
h
t
i
w
s
d
r
a
o
b
t
n
i
o
j
t
o
n
o
D
.
2
1
defects.
.
s
n
o
i
t
a
c
o
l
t
e
w
n
i
e
s
u
r
o
n
i
a
r
o
t
e
s
o
p
x
e
T
O
N
O
D
.
3
1
.
e
l
b
a
t
d
n
a
e
c
n
e
f
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
t
r
o
p
p
u
s
s
y
a
w
l
A
.
4
1
Never attempt any operation free-handed.
.
n
o
i
t
a
t
o
r
d
a
e
h
r
e
t
t
u
c
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
d
e
e
f
s
y
a
w
l
A
.
5
1
Never move workpiece backward while feeding.
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
6
1
users; restrict access or disable machine when
unattended.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Cutterhead
exposed
between
these lines
Rear of G0893
G0821 Machine Labels
(11.25.16)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
DANGER!
WARNING!
WARNING!
Use this guard for all
operations possible, and
immediately reinstall it
following operations that
require its removal.
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operator’s
hands contacting the
cutterhead while cutting.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
MODEL G0821
6" BENCHTOP JOINTER
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
Date
Mfd. for Grizzly in China
S/N
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
e
r
o
f
e
b
r
e
w
o
p
t
c
e
n
n
o
c
s
i
d
d
n
a
F
F
O
r
o
t
o
m
n
r
u
T
.
0
1
changing inserts, adjusting fence, or servicing.
t
n
e
v
e
r
p
o
t
w
o
h
d
n
a
s
d
r
a
z
a
h
"
k
c
a
b
k
c
i
k
"
f
o
e
r
a
w
a
e
B
.
1
1
them.
y
n
a
r
o
,
s
t
o
n
k
e
s
o
o
l
,
s
k
c
a
r
c
h
t
i
w
s
d
r
a
o
b
t
n
i
o
j
t
o
n
o
D
.
2
1
defects.
.
s
n
o
i
t
a
c
o
l
t
e
w
n
i
e
s
u
r
o
n
i
a
r
o
t
e
s
o
p
x
e
T
O
N
O
D
.
3
1
.
e
l
b
a
t
d
n
a
e
c
n
e
f
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
t
r
o
p
p
u
s
s
y
a
w
l
A
.
4
1
Never attempt any operation free-handed.
.
n
o
i
t
a
t
o
r
d
a
e
h
r
e
t
t
u
c
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
d
e
e
f
s
y
a
w
l
A
.
5
1
Never move workpiece backward while feeding.
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
6
1
users; restrict access or disable machine when
unattended.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Cutterhead
exposed
between
these lines
G0821 Machine Labels
(11.25.16)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
W
ARNING!
EYE/LUNG INJUR
Y
HAZARD!
Always wear safety glasses and a
K
C
O
H
S/
Y
R
UJ
NI
!
D
R
A
Z
A
H
r
e
w
o
p t
ce
n
n
oc
si
D
,
st
ne
mt
s
uj
da
er
of
e
b
To reduce risk of death or serious injury, read manual BEFORE using machine.
WARNIN
G
!
12
80
G
L
E
D
O
M
R
E
T
NI
OJ
P
OT
H
C
N
E
B
"6
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
et
a
D
a
ni
h
C
ni
yl
zzi
r
G r
of .
df
M
N/
S
To reduce risk of serious injury when using this machine:
1.
Read & understand owner’s manual before operating.
2.
Always wear approved eye protection and respirator.
3.
Only plug power cord into a grounded outlet.
4.
Keep all guards in place and in proper operating condition.
5.
Never cut workpieces smaller than 8" long, 3/4" wide, or 1/2" thick.
6.
Always use push blocks when face planing.
7.
Keep hands at least 12" away from cutterhead.
8.
Never cut deeper than 1/8" on a single pass.
9.
Tie back long hair, roll up sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
e
r
of
e
b r
e
w
o
p t
ce
n
n
oc
si
d
d
na
F
F
O r
ot
o
m
nr
u
T
.
01
changing inserts, adjusting fence, or servicing.
t
ne
ve
r
p
ot
w
o
h
d
na
s
dr
az
a
h
"k
ca
bk
ci
k"
f
o
er
a
wa
e
B
.
11
them.
y
na
r
o ,
st
o
nk
es
o
ol ,
sk
ca
rc
hti
w
s
dr
a
o
b t
ni
oj
t
o
n
o
D
.
21
defects.
.s
n
oit
ac
ol
te
w
ni
es
u r
o
ni
ar
ot
es
o
px
e
T
O
N
O
D
.
31
.
el
ba
t
d
na
ec
ne
f t
s
ni
a
ga
ec
ei
pk
r
o
w t
r
o
p
p
us
sy
a
wl
A
.
41
Never attempt any operation free-handed.
.
n
oit
at
or
da
e
hr
ett
uc
ts
ni
a
ga
ec
ei
pk
r
o
w
de
ef
sy
a
wl
A
.
51
Never move workpiece backward while feeding.
de
ni
art
n
u r
o
ne
r
dli
hc
y
b
es
u
de
zir
o
ht
ua
n
u t
ne
ve
r
P
.
61
users; restrict access or disable machine when unattended.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Cutterhead
exposed
between
these lines
G0821 Machine Labels
(11.25.16)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
DANGER!
WARNING!
WARNING!
Use this guard for all
operations possible, and
immediately reinstall it
following operations that
require its removal.
ROTATING
CUTTERHEAD BELOW!
KICKBACK HAZARD!
1. Ensure outfeed table is
even with knives.
2. Never exceed the
maximum depth of cut.
3. Do not stand directly
behind workpiece.
ALWAYS USE
PUSH BLOCKS!
Push blocks minimize the
possibility of operator’s
hands contacting the
cutterhead while cutting.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
MODEL G0821
6" BENCHTOP JOINTER
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Spiral, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
Date
Mfd. for Grizzly in China
S/N
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
e
r
o
f
e
b
r
e
w
o
p
t
c
e
n
n
o
c
s
i
d
d
n
a
F
F
O
r
o
t
o
m
n
r
u
T
.
0
1
changing inserts, adjusting fence, or servicing.
t
n
e
v
e
r
p
o
t
w
o
h
d
n
a
s
d
r
a
z
a
h
"
k
c
a
b
k
c
i
k
"
f
o
e
r
a
w
a
e
B
.
1
1
them.
y
n
a
r
o
,
s
t
o
n
k
e
s
o
o
l
,
s
k
c
a
r
c
h
t
i
w
s
d
r
a
o
b
t
n
i
o
j
t
o
n
o
D
.
2
1
defects.
.
s
n
o
i
t
a
c
o
l
t
e
w
n
i
e
s
u
r
o
n
i
a
r
o
t
e
s
o
p
x
e
T
O
N
O
D
.
3
1
.
e
l
b
a
t
d
n
a
e
c
n
e
f
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
t
r
o
p
p
u
s
s
y
a
w
l
A
.
4
1
Never attempt any operation free-handed.
.
n
o
i
t
a
t
o
r
d
a
e
h
r
e
t
t
u
c
t
s
n
i
a
g
a
e
c
e
i
p
k
r
o
w
d
e
e
f
s
y
a
w
l
A
.
5
1
Never move workpiece backward while feeding.
d
e
n
i
a
r
t
n
u
r
o
n
e
r
d
li
h
c
y
b
e
s
u
d
e
z
i
r
o
h
t
u
a
n
u
t
n
e
v
e
r
P
.
6
1
users; restrict access or disable machine when
unattended.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Failure to keep hands clear of cutterhead
may result in serious personal injury.
Cutterhead
exposed
between
these lines
201
202
203
206
207
208
204
203
205
MODEL G0893
6" BENCHTOP JOINTER
w/HELICAL CUTTERHEAD
Motor: 1-1/2 HP, 120V, 60 Hz
Full-Load Current Rating: 12A
Cutterhead Type: Helical, 1-7/8" dia.
Number of Cutter Rows: 3
Number of Cutters: 18
Cutterhead Insert Size: 15 x 15 x 2.5mm
Grizzly Replacement Cutters: T24736
(10-Pack)
Maximum Depth of Cut: 1/8"
Maximum Width of Cut: 6"
Minimum Workpiece Size: 8"L x 1/2" T
Cutterhead Speed: 8000 RPM
Cuts Per Minute: 24,000
Fence Tilt: 45º – 135º
Table Size: 6-1/4" x 30-3/8"
Weight: 50 lbs.
Specifications
WARNING!
Date
Mfd. for Grizzly in China
S/N
To reduce risk of serious injury when using this machine:
1. Read & understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Keep all guards in place and in proper operating
condition.
5. Never cut workpieces smaller than 8" long, 3/4" wide,
or 1/2" thick.
6. Always use push blocks when face planing.
7. Keep hands at least 12" away from cutterhead.
8. Never cut deeper than 1/8" on a single pass.
9. Tie back long hair, roll up sleeves, and DO NOT wear
loose clothing, gloves, or jewelry.
10. Turn motor OFF and disconnect power before
changing inserts, adjusting fence, or servicing.
11. Be aware of "kickback" hazards and how to prevent
them.
12. Do not joint boards with cracks, loose knots, or any
defects.
13. DO NOT expose to rain or use in wet locations.
14. Always support workpiece against fence and table.
Never attempt any operation free-handed.
15. Always feed workpiece against cutterhead rotation.
Never move workpiece backward while feeding.
16. Prevent unauthorized use by children or untrained
users; restrict access or disable machine when
unattended.
REF PART #
DESCRIPTION
REF
PART #
DESCRIPTION
201
P0893201
FENCE WARNING LABEL
205
P0893205
GLASSES/RESPIRATOR LABEL
202
P0893202
CUTTERHEAD GUARD LABEL
206
P0893206
DISCONNECT 110V LABEL
203
P0893203
ELECTRICITY LABEL
207
P0893207
READ MANUAL LABEL
204
P0893204
TOUCH-UP PAINT, GRIZZLY GREEN
208
P0893208
MACHINE ID LABEL
Summary of Contents for G0893
Page 53: ......
