-42-
Model G0889/G0889Z (Mfd. Since 12/18)
Replacing Table
Height Chain
The table height chain transfers movement from
the elevation handwheel to the leadscrews that
control cutterhead height. Replace the chain drive
if the chain stretches over time or breaks.
Tools Needed
Qty
Needle Nose Pliers ............................................ 1
Hex Wrench 6mm .............................................. 1
To replace table height chain:
1. DISCONNECT MACHINE FROM POWER!
2. Gently tilt machine onto its side to expose
table height chain (see
Figure 48) and
sprockets.
3. Locate chain connection clasp and remove
cotter pin to disconnect chain (see
Figure 48).
4. Clean and lubricate new chain and leadscrew
sprockets (refer to
Headstock Height Chain
on
Page 33 for detailed instructions).
5. Install chain around sprockets, and connect
chain with cotter pin.
Figure 48. Table height chain.
Cotter Pin
Summary of Contents for G0889
Page 52: ...50 Model G0889 G0889Z Mfd Since 12 18...
Page 56: ......
