manualshive.com logo in svg

Grizzly G0857, Owner'S Manual

The Grizzly G0857, a powerful and versatile tool, comes equipped with an extensive Owner's Manual. Available for free download at manualshive.com, this comprehensive manual provides step-by-step instructions and detailed illustrations, ensuring users can fully utilize their Grizzly G0857 and maximize its performance.

Share
Download
background image

-8-

Model G0857/G0858 (Mfd. Since 07/19)

The information contained herein is deemed accurate as of 9/3/2019 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0858

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0858 8" X 76" PARALLELOGRAM JOINTER WITH

HELICAL CUTTERHEAD & MOBILE BASE

Product Dimensions:

Weight.............................................................................................................................................................. 365 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 76 x 25 x 41-1/2 in.

Footprint (Length x Width)............................................................................................................................ 40 x 16 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 470 lbs.

Length x Width x Height....................................................................................................................... 85 x 26 x 43 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 230V, Single-Phase, 60 Hz

Motor Size............................................................................................................................................................ 3 HP

Full-Load Current Rating........................................................................................................................................ 12A

Minimum Circuit Size.............................................................................................................................................. 20A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 6-20

Switch Type....................................................................................... Push Button Magnetic w/Large Shut-Off Paddle

Motors:

Main

Horsepower................................................................................................................................................ 3 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 12A

Speed................................................................................................................................................ 3450 RPM

Type................................................................................................................. TEFC Capacitor-Start Induction

Power Transfer .................................................................................................................................. Belt Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Centrifugal Switch/Contacts Type......................................................................................................... External

Main Specifications:

Main Specifications

Jointer Size.................................................................................................................................................. 8 in.

Bevel Jointing............................................................................................................................. 0 – 45 deg. L/R

Maximum Width of Cut................................................................................................................................ 8 in.

Maximum Depth of Cut............................................................................................................................. 1/8 in.

Minimum Workpiece Length...................................................................................................................... 10 in.

Minimum Workpiece Thickness................................................................................................................ 1/2 in.

Maximum Rabbeting Depth...................................................................................................................... 1/2 in.

Number of Cuts Per Minute..................................................................................................................... 22,000

Machine Data Sheet (G0858)

Summary of Contents for G0857


































































Reviews:

No comments

Related manuals for G0857

Daxten IBOOT - Brochure preview
IBOOT -
Brand: Daxten Pages: 2
Ganz GH Series Instruction Manual preview
GH Series
Brand: Ganz Pages: 8
Hama Universal Notebook Power Supply Operating Instructions Manual preview
Universal Notebook Power Supply
Brand: Hama Pages: 24
Nemtek druid LCD User Manual preview
druid LCD
Brand: Nemtek Pages: 17
Nemtek MERLIN 4 User Manual preview
MERLIN 4
Brand: Nemtek Pages: 10
QTORQ SP5 Manual preview
SP5
Brand: QTORQ Pages: 4
HIKOKI NT 1850DA Handling Instructions Manual preview
NT 1850DA
Brand: HIKOKI Pages: 332
REMS Akku-Press 22 V ACC Instruction Manual preview
Akku-Press 22 V ACC
Brand: REMS Pages: 212
Nordson Standard iControl Instruction Sheet preview
Standard iControl
Brand: Nordson Pages: 6
TREND PTB/KWJ900 Manual preview
PTB/KWJ900
Brand: TREND Pages: 19
Sieg AXMINSTER Model Engineer Series Original Instructions Manual preview
AXMINSTER Model Engineer Series
Brand: Sieg Pages: 28
LIVARNO LUX 306794 Operation And Safety Notes preview
306794
Brand: LIVARNO LUX Pages: 100
patura P25 Solar User Manual preview
P25 Solar
Brand: patura Pages: 76
Powersmart PS6110 Instruction Manual preview
PS6110
Brand: Powersmart Pages: 17
Urrea TRM300 User Manual preview
TRM300
Brand: Urrea Pages: 20
G-Tec Basic TTCF-6 How To Operate preview
Basic TTCF-6
Brand: G-Tec Pages: 11
CP CP7600xB Series Operator'S Manual preview
CP7600xB Series
Brand: CP Pages: 64
Altrad ATIKA 302360 Original Instructions Manual preview
ATIKA 302360
Brand: Altrad Pages: 128

Brands by name

Popular brands

Load more brands