Grizzly G0857, Owner'S Manual

Page: 7 / 65

-4-
Model G0857/G0858 (Mfd. Since 07/19)
Controls &
Components
Refer to
Figures 1–4 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. ON/STOP controls.
A
B
A. ON Button: Push to start motor. Insert pad-
lock through button to disable (padlock not
included).
B. STOP Paddle: Push to stop motor.
C. Outfeed Table: Supports workpiece after it
passes over cutterhead. For optimum results,
outfeed table must be properly adjusted
even with highest point of cutterhead knives/
inserts.
D. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel jointing.
E. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead knives/inserts deter-
mines depth of cut.
F. Infeed Table Adjustment Lever: Move up or
down to adjust position of infeed table (when
infeed table lock is loosened).
G. Mobile Base Lock Knobs: Tighten to secure
jointer in position; loosen to move jointer.
H. Outfeed Table Adjustment Lever: Move up
or down to adjust position of outfeed table
(when outfeed table lock is loosened). Only
used when setting outfeed table even with
cutterhead knives/inserts.
Figure 2. Table controls and components.
C D E
F
H
G