Model G0841 (Mfd. Since 06/18)
-3-
Identification (Front)
Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Infeed Table
Handwheel
Infeed
Table
Lower Cutterhead
Carriage
Lower
Cutterhead
Control Panel
Headstock Elevation
Chain Tensioner
Feed Track
Tensioner (1 of 2)
Feed Rate
Dial
Infeed Safety Guard
w/Emergency Stop
Plate
Power
Lamp
One-Shot Oiler
w/Reservoir
Lower Cutterhead
Depth-of-Cut Scale
Headstock Height
Handwheel
Upper Cutterhead Depth-
of-Cut Scale (1 of 2)
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, seri-
ous personal injury may occur.
Headstock Height
Switch (1 of 2)
Feed Track Tension Lever
w/Scale & Lock Lever
Summary of Contents for G0841
Page 84: ......