Model G0818 (Mfd. Since 10/16)
-23-
order online at
www.grizzly.com
or call
1-800-523-4777
Metal Elbows
These industrial metal elbows are available from
4"–6" with 90˚, 60˚, 45˚, or 30˚ curves. Also, avail-
able with a 90˚ long radius curve.
G6177—4" Metal Blast Gate
G7340—5" Metal Blast Gate
G7358—6" Metal Blast Gate
Control airflow and resistance between machines.
Figure 25.
Metal blast gates.
G6252—4" Floor Sweep
G7341—5" Floor Sweep
G7359—6" Floor Sweep
Great for cleaning up around the shop, these
metal floor sweeps close tight when not in use.
Figure 28.
Industrial floor sweeps.
G6163—4" Dust Collection Pipe Clamp
G7343—5" Dust Collection Pipe Clamp
G7361—6" Dust Collection Pipe Clamp
These clamps feature lever latches and foam
seals that secure around the rolled ends of fittings
and pipe.
Figure 27.
Dust collection pipe clamps.
T27418—Viewing Spool 4"
T27419—Viewing Spool 5"
T27420—Viewing Spool 6"
This viewing spool is a section of acrylic glass
with QF ends so you can inspect material flow.
Ends are 22-gauge. Total length 12
1
⁄
2
".
Figure 26.
Viewing spools.
Figure 24.
4" Metal elbows.
45°
60°
30°
90° Long Radius
90°
G6165
G6169
G6168
G6167
G6166
T26512—4" Dust Collection Ball Joint
T26513 —6" Dust Collection Ball Joint
This ball joint for your dust collection system
allows for 22° of movement off center. In 4" and
6" diameter sizes, both are 8" long and 20-gauge.
Figure 29.
Dust collection ball joints.
Summary of Contents for G0818
Page 15: ...Model G0818 Mfd Since 10 16 13 5mm Hardware Recognition Chart ...
Page 40: ......
