Grizzly G0818, Owner'S Manual

Page: 14 / 40

-12-
Model G0818 (Mfd. Since 10/16)
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Loose Components (Figure 2) Qty
A. Y-Inlet 4 X 4 X 6" ........................................ 1
B.
Collection Drawer ....................................... 1
C. Air Filter Dust Tray ...................................... 1
D.
Stainless-Steel Mesh Filter......................... 1
E. Active Carbon Filter .................................... 1
F.
Pleated Micro Filter .................................... 1
Figure 2. Loose components inventory.
B
C
D E
A
F
Hardware (Figure 3) Qty
G. Cap Screws M8-1.25 x 16 .......................... 6
H.
Lock Washers 8mm.................................... 6
I. Flat Washers 8mm ..................................... 6
Figure 3. Hardware inventory.
H
G
I