Grizzly G0818, Owner'S Manual

Page: 22 / 40

-20-
Model G0818 (Mfd. Since 10/16)
SECTION 4: OPERATIONS
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury, lung damage,
or injury from exposure to toxic metal dust,
always wear safety goggles, a respirator
and heavy leather gloves when operating or
servicing this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
To use metal dust collector:
1. Turn metal dust collector ON.
2. Turn dust-producing machine ON and per-
form operation.
3.
Turn dust-producing machine
OFF when
operation is complete.
4. Turn metal dust collector OFF when finished
with operation or to check/clean collection
drawer. Empty drawer and tray when approxi-
mately
1
⁄
3
–
1
⁄
2
full.
IMPORTANT:
Wear NIOSH-approved res-
pirator, ANSI-approved safety goggles and
leather gloves whenever checking or empty-
ing collection drawer and air filter dust tray.
Keep metal dust off clothing and skin.
Operation
This metal dust collector draws metal dust into
a collection drawer and discharges air through a
3-stage air-filter system.
Metal dust is collected in a primary 1.0-cubic-foot
drawer that slides into the main compartment
behind an access door, as shown in
Figure 15 . A
secondary dust tray in the air filter compartment
holds 0.23 cubic feet of material (see
Figure 15,
inset
).
When machine is not in use, remove safety key
from
ON/OFF switch to avoid accidental startup.
Figure 15.
Collection drawer and dust tray
locations.
Never operate machine with damaged or
worn parts. Never operate machine with
filters, guards, or covers removed.
Access
Door
Dust Tray
Collection Drawer
Filter
Door
Opening