-42-
Model G0806/G0807 (Mfd. Since 12/15)
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily:
•
Check/correct loose mounting bolts.
•
Check/correct damaged or dull saw blade.
•
Check/correct worn or damaged wires.
•
Clean/protect table.
•
Clean metal chips from upper and lower
wheel areas, and empty the chip chute.
•
Correct any other unsafe condition.
Monthly:
•
Check for V-belt tension, damage, or wear
(
Page 45).
•
Lubricate tension leadscrews and guide post
rack.
•
Remove the blade and clean the wheels.
Yearly:
•
Open rear lower access panel, inspect belts,
and tighten all fasteners (see
Page 45).
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning &
Protecting
Use a brush and a shop vacuum to remove chips
and other debris from the machine. Keep the table
rust-free with regular applications of products like
G96
®
Gun Treatment, SLIPIT
®
, or Boeshield
®
T-9
(see
Page 41 for more details).
Once a month, remove the blade and thoroughly
clean all metal chips or oil from the wheel surfac-
es. Redress the rubber tires if the become glazed.
When cleaning the wheel areas, empty and clean
the chip chute and brush (see
Figure 54).
Figure 54. Lower wheel and chip chute.
Chip
Chute
Chip Brush
Summary of Contents for G0806
Page 80: ......