-4-
Model G0795Z (Mfd. Since 06/17)
Controls &
Components
Figure 1. Control panel and spindle controls
(right view).
Refer to
Figures 1–2 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
B
A
F
G
I
J
C
D
E
K. Fine Downfeed Handwheel: Moves spindle
up and down for precise Z-axis control when
milling. Micrometer collar graduated in incre-
ments of 0.001".
L. Depth Stop and Scale: Limits depth of
spindle downfeed stroke to preset height as
indicated on the scale.
M. Depth Stop Adjustment Knob: Adjusts
position of depth stop.
N. Quill Lock Lever: Locks quill at desired
height above workpiece.
O. Z-Axis Column Locks: Used to secure
headstock in position above table.
P. Headstock Elevation Crank Handle: Moves
headstock up and down for proper spindle
position during setup.
A. Digital Spindle Speed Tachometer: Shows
spindle speed in RPM.
B. Variable-Speed Spindle Dial: Changes
spindle speed from 50–1000 RPM in low
range and 100–2300 RPM in high range.
C. Off Button: Stops spindle rotation.
D. Spindle Speed Range Knob: Selects either
low or high spindle speed range.
E. Coarse Downfeed Handle: Typically used
for drilling operations for rapid drilling or
plunge cutting. Spring-assisted return auto-
matically returns spindle to top position when
released.
F. Downfeed Selector Knob: Selects fine or
coarse downfeed controls. When loosened,
coarse downfeed is engaged; when tight-
ened, fine downfeed is engaged.
G. E-Stop Button: Cuts power to the spindle
motor and remains depressed until reset.
Twist clockwise to reset.
H. Spindle Direction Buttons: Controls spindle
direction of rotation (right or left, as viewed
from above). The spindle must be completely
stopped before either button is pushed.
I. Drill/Stop/Tap Switch: Sets the spindle
mode to either Drill, Stop, or Tap.
J. Power Button: Push to turn machine ON.
Illuminates when machine is connected to
power.
Figure 2. Control panel and spindle controls (left
view).
N
K
L
M
P
O
H
Summary of Contents for G0795Z
Page 64: ......
