-2-
Model G0751 (Mfg. Since 1/13)
INTRODUCTION
Machine Description
We are proud to provide a high-quality owner’s
manual with your new machine!
We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
contained inside. sometimes we make mistakes,
but our policy of continuous improvement also
means that
sometimes the machine you receive
will be slightly different than what is shown in
the manual.
if you find this to be the case, and the difference
between the manual and machine leaves you
confused about a procedure, check our website
for an updated version. We post current manuals
and manual updates for free on our website at
www.grizzly.com.
alternatively, you can call our technical support
for help. Before calling, please write down the
Manufacture Date and Serial Number stamped
into the machine id label (see below). this infor-
mation helps us determine if updated documenta-
tion is available for your machine.
Manufacture date
serial number
Manual Accuracy
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: [email protected]
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
the Model g0751 is a fully-featured drill press that
strikes a great balance between being heavy-duty
and high-precision.
the spindle is fully reversible, features both
coarse and fine downfeed controls, tapping con-
trols that can be set for repeatable production,
and a digital read out. the six spindle speeds
range from 90–1970 rpM and are controlled by
convenient levers in an oil-bath-lubricated and
gear-driven headstock.
the headstock tilts 90° left/right and moves in the
z-axis on a massive column. the table features a
built-in recycling coolant system, movement in all
three paths, and rotation around the column so
the workpiece can be mounted on the base for
those really big jobs.
Summary of Contents for G0751
Page 64: ......
