manualshive.com logo in svg

Grizzly G0726, Owner'S Manual

The Grizzly G0726 Owner's Manual is a comprehensive guide that empowers users to maximize their experience with this exceptional product. Easily accessible for free download on our website, this manual provides step-by-step instructions and valuable tips, ensuring users can effortlessly set up, operate, and maintain their Grizzly G0726, guaranteeing optimal performance and longevity. {[website]}

Share
Download
background image

Model G0726 (Mfg. Since 7/11)

-7-

The information contained herein is deemed accurate as of 4/5/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0726

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0726 12" X 54" MILLING MACHINE

Product Dimensions:

Weight............................................................................................................................................................ 3960 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 55-5/8 x 61 x 93 in.

Footprint (Length x Width)..................................................................................................................... 51 x 24-1/4 in.

Space Required for Full Range of Movement (Width x Depth).................................................................. 100 x 72 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 3750 lbs.

Length x Width x Height....................................................................................................................... 70 x 75 x 91 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement................................................................................................................... 220V, 3-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating..................................................................................................................................... 15.7A

Minimum Circuit Size.............................................................................................................................................. 20A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included............................................................................................................................................... No

Recommended Power Cord............................................................................... “S”-Type, 4-Wire, 12 AWG, 300 VAC

Plug Included........................................................................................................................................................... No

Recommended Plug Type................................................................................................................................... 15-20

Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection

Recommended Phase Converter....................................................................................................................... G5845

Motors:

Main

Type........................................................................................................................................... TEFC Induction

Horsepower................................................................................................................................................ 5 HP

Phase.................................................................................................................................................... 3-Phase

Amps......................................................................................................................................................... 14.2A

Speed................................................................................................................................................ 1725 RPM

Power Transfer .......................................................................................... Belt Drive w/Variable-Speed Pulley

Bearings..................................................................................................... Shielded & Permanently Lubricated

Table Elevation

Type........................................................................................................................................... TEFC Induction

Horsepower............................................................................................................................................. 1/2 HP

Phase.................................................................................................................................................... 3-Phase

Amps........................................................................................................................................................... 1.5A

Power Transfer ............................................................................................................................... Direct Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Machine Data Sheet

Summary of Contents for G0726

















































































Reviews:

No comments

Related manuals for G0726

Magpowr PS90 Instruction Manuals preview
PS90
Brand: Magpowr Pages: 4
Earlex HG1500 Safety & Operating Instructions preview
HG1500
Brand: Earlex Pages: 4
Caen SY 1527 Technical Information Manual preview
SY 1527
Brand: Caen Pages: 17
Danfoss VLT Automation Drive FC 300 Operating Instructions Manual preview
VLT Automation Drive FC 300
Brand: Danfoss Pages: 134
Hama 39685 Manual preview
39685
Brand: Hama Pages: 24
JBM 53145 Instruction Manual preview
53145
Brand: JBM Pages: 12
parktool PB-5 Manual preview
PB-5
Brand: parktool Pages: 2
MAC TOOLS MCF894 Original Instructions Manual preview
MCF894
Brand: MAC TOOLS Pages: 44
L-Acoustics LA12X User Manual preview
LA12X
Brand: L-Acoustics Pages: 72
Pulsar PSBSH 1012B Manual preview
PSBSH 1012B
Brand: Pulsar Pages: 8
YATO YT-82902 Original Instructions Manual preview
YT-82902
Brand: YATO Pages: 80
Wacker Neuson DPU 2950 Operator'S Manual preview
DPU 2950
Brand: Wacker Neuson Pages: 22
Hakko Electronics FX-1003 Instruction Manual preview
FX-1003
Brand: Hakko Electronics Pages: 2
Dahua Technology DH-PFM363L-D1 User Manual preview
DH-PFM363L-D1
Brand: Dahua Technology Pages: 28
Woodland Mills BANDSAW BLADE SHARPENER Operator'S Manual preview
BANDSAW BLADE SHARPENER
Brand: Woodland Mills Pages: 56
Atlas Copco PRO 8425 0206 30 Product Instructions preview
PRO 8425 0206 30
Brand: Atlas Copco Pages: 64
Performance Tool M567DB Owner'S Manual preview
M567DB
Brand: Performance Tool Pages: 4
Balcrank Signature DEF Series Operation, Installation, Maintenance And Repair Manual preview
Signature DEF Series
Brand: Balcrank Pages: 12

Brands by name

Popular brands

Load more brands