Grizzly G0700, Owner'S Manual

Page: 34 / 85

-32-
Model G0700 (Mfd. Since 5/14)
The riving knife included with this machine is
0.090" (2.3mm) thick and is only designed for 10"
diameter blades.
When choosing a main blade, make sure the
blade size meets the requirements listed below.
The thickness of the blade body and teeth can be
measured with calipers or any precision measur-
ing device.
Blade Size Requirements:
•
Body Thickness: 0.079"–0.090"
(2.0mm–2.3mm)
• Kerf (Tooth) Thickness: 0.122"–0.129"
(3.1mm–3.3mm)
Blade Requirements
Figure 37. Ripping blade.
Blade Selection
This section on blade selection is by no means
comprehensive. Always follow the saw blade
manufacturer's recommendations to ensure safe
and efficient operation of your table saw.
Ripping Blade Features:
•
Best for cutting with the grain
• 20-40 teeth
• Flat-top ground tooth profile
• Large gullets for large chip removal
Flat
Top
Blade