
-12-
g0650 Welding downdraft table
Assembly
2. install the two drawer latches with the six
M5-.8 X 12 slotted screws and hex nuts
(
Figure 3).
3. With the help of an assistant, install the four
legs to the cabinet with the
3
/
8
"-16 X
3
/
4
" hex
bolts and flat washers (
Figure 3).
4. install the remaining handle on the drawer
front with two
3
/
8
"-24 hex nuts, flat washers,
and hex nuts (
Figure 4).
5. slide the slag screen into the drawer slot and
install the drawer into the cabinet (
Figure 4).
Figure 3. handle, latch, and leg installation.
To assemble the welding table:
1. install four lifting handles onto the cabinet,
using eight
3
/
8
"-24 hex nuts and flat washers
(
Figure 3).
Figure 4. slag screen and drawer installation.
6. secure the flexible suction hose to the spout
at the rear of the downdraft table with the 5"
hose clamp, and place the vented work table
onto the top of the cabinet (
Figure 5).
Figure 5. Final assembly.
7. insert the spark shields and secure the
top corners with the thumb knobs and the
remaining flat washers (
Figure 5).