-20-
model g0631 (mfg. since 3/10)
review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical
support at (570) 546-9663.
SEcTiON 7: SERvicE
Troubleshooting
Motor & Electrical
symptom
possible Cause
possible solution
machine does not
start or a fuse/
breaker trips.
1. Fuse/breaker has blown.
2. switch disabling key is removed or at fault.
3. motor is at fault.
4. Capacitor is at fault.
1. Correct short/replace fuse/replace breaker.
2. install/replace switch disabling key; replace switch.
3. Correct motor wiring connections or replace bad
motor.
4. replace capacitor.
machine has vibra-
tion or noisy opera-
tion.
1. Fan is bent or loose.
2. motor or component is loose.
1. Adjust fan balance or replace fan.
2. inspect/replace stripped or damaged bolts/nuts, and
re-tighten with thread locking fluid.
Operations
symptom
possible Cause
possible solution
downdraft table
does not adequately
collect dust; poor
performance.
1. dust collection drawer is full.
2. Filter is dirty.
1. Empty collection drawer (
page 17
).
2. Knock dust off filter. if this has no effect, replace with
new filter unit.
