manualshive.com logo in svg

Grizzly G0631, Owner'S Manual, Page: 5 / 32

Share
Download
Grizzly G0631 Owner'S Manual Download Page 5

model g0631 (mfg. since 3/10)

-3-

The information contained herein is deemed accurate as of 4/7/2010 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0631

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0631 79" X 28" EXTRA LONG DOWNDRAFT TABLE

Product Dimensions:

Weight.............................................................................................................................................................. 442 lbs.

Length/Width/Height...........................................................................................................27-3/4 x 78-3/4 x 39-3/4 in.

Foot Print (Length/Width).................................................................................................................. 27-3/4 x 78-3/4 in

Shipping Dimensions:

Type.................................................................................................................................... Cardboard/Wood Runners

Content............................................................................................................................................................ Machine

Weight.............................................................................................................................................................. 486 lbs.

Length/Width/Height.................................................................................................................28-3/4 x 80-1/4 x 41 in.

Electrical:

Switch.................................................................................................................................... Toggle with Lockout Key

Switch Voltage...................................................................................................................................................... 110V

Cord Length.......................................................................................................................................................... 12 ft.

Cord Gauge....................................................................................................................................................14 guage

Minimum Circuit Size........................................................................................................................................ 15 amp

Plug Included.......................................................................................................................................................... Yes

Motors:

Main #2

Type....................................................................................................................ODP Capacitor Start Induction

Horsepower.................................................................................................................................................1 HP

Voltage........................................................................................................................................................110V

Phase........................................................................................................................................................Single

Amps.............................................................................................................................................................12A

Speed.................................................................................................................................................1725 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ................................................................................................................................Direct Drive

Bearings....................................................................................................................... Shielded and Lubricated

Main #1

Type....................................................................................................................ODP Capacitor Start Induction

Horsepower.................................................................................................................................................1 HP

Voltage........................................................................................................................................................110V

Phase........................................................................................................................................................Single

Amps.............................................................................................................................................................12A

Speed.................................................................................................................................................1725 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ................................................................................................................................Direct Drive

Bearings....................................................................................................................... Shielded and Lubricated

Summary of Contents for G0631

































Reviews:

No comments