Grizzly G0592, Owner'S Manual

Page: 15 / 60

G0592 Metal Cutting Bandsaw
-13-
Inventory
After all the parts have been removed from the
crate, you should have the following items:
Box 1: (Figure 4) Qty
A.
Splash Guard ............................................. 1
B. Lower Chip Tray ......................................... 1
C.
Upper Chip Tray ......................................... 1
D. Work Stop Rod ........................................... 1
E.
Work Stop Arm ........................................... 1
F. Work Stop ................................................... 1
G.
Leveling Feet .............................................. 4
H. Model G0592 Bandsaw (not shown) .......... 1
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 4.
G0592 loose inventory.
A
B
C
D
E
F
G
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.