-18-
Model G0568/G0569 (Mfd. Since 10/11)
Inventory
Box 1 (Figure 16-17):
Qty
A. Bandsaw (not shown) ................................. 1
B. Fence Handle ............................................. 1
C. Fence.......................................................... 1
D. Handwheel ................................................. 1
E. Eye Bolts .................................................... 2
F. Hex Wrench 5mm ....................................... 1
G. Hex Wrench 6mm ....................................... 1
H. Open End Wrench 10 x 13 ......................... 1
I. Open End Wrench 17 x 19 ......................... 1
J. Miter Gauge ................................................ 1
K. Handwheel Handle ..................................... 1
Figure 17. Riser blocks and hardware.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
L
M
B
C
D
E
F
G
H
I
J
K
Figure 16. Main inventory.
L. Riser Blocks ............................................... 2
M. Hardware .................................................... 1
—Hex Bolts M12-1.75 x 100 ....................... 4
—Flat Washers 12mm ................................ 4
—Lock Washers 12mm .............................. 4
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Summary of Contents for G0568
Page 80: ......
