-26-
Model G0526A40 (Mfd. Since 12/22)
Squaring Stock
Previously Surface
Planed Face
Squaring stock involves four steps performed
in the order below:
1. Surface Plane on Jointer—Concave face of
workpiece is surface planed flat with jointer.
2. Surface Plane on a Thickness Planer—
Opposite face of workpiece is surface planed
flat with a thickness planer.
3. Edge Joint on Jointer—Concave edge of
workpiece is jointed flat with jointer.
15
30
45
Previously
Jointed
Edge
4. Rip Cut on a Table Saw—Jointed edge
of workpiece is placed against a table saw
fence and opposite edge cut off.
Summary of Contents for G0526A40
Page 60: ......
