G0510 3⁄4 HP Shaper
-15-
Always wear a dust mask
when operating this
shaper. Using this
machine produces saw-
dust that may cause
short and long-term res-
piratory illness.
SECTION 6: OPERATIONS
Wear safety glasses dur-
ing the entire operation
process. Failure to com-
ply may result in serious
personal injury.
Disconnect power from
the machine when per-
forming any mainte-
nance, assembly or
adjustments. Failure to
do this may result in seri-
ous personal injury.
!
Keep loose clothing out
of the way of machinery
and keep hair pulled
back during operations.
NOTICE
The following section was designed to give
instructions on the basic operations of this
shaper. However, it is in no way comprehen-
sive of every shaper application. WE
STRONGLY RECOMMEND that you read
books, trade magazines, or get formal train-
ing to maximize the potential of your shaper.
Figure 9. FWD/REV switch.
Rotation
Your shaper is equipped with a FWD/REV (for-
ward and reverse) switch.
See Figure 9. In many
instances, it will be necessary to flip the cutter
over and reverse the cutter rotation. Whenever
possible, mount the cutter so the board is milled
on the bottom side (the side away from the oper-
ator). This does a better job and it is safer for the
operator.
Always check the direction of the cutter rota-
tion before any shaping operation.
Summary of Contents for G0510
Page 39: ......
