-2-
Model G0505 (Mfg. since 4/04)
INTRODUCTION
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
C
/
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
Functional Overview
Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. However, sometimes errors do
happen and we apologize for them.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match
the manual. If you find this to be the case, and
the difference between the manual and machine
leaves you in doubt, immediately call our techni-
cal support for updates or clarification.
For your convenience, we always keep current
Grizzly manuals and most updates available on
our website at
www.grizzly.com. Any updates to
your machine will be reflected in these documents
as soon as they are complete. Visit our site often
to check for the latest updates!
A planer is designed to remove material in precise
increments from the surface of natural wood fiber
stock to make the workpiece flat.
Once the depth of cut is set, the workpiece is
placed on the table and fed into the infeed roller,
as shown in
Figure 1, which pulls the workpiece
under the rotating cutterhead where the material
is removed. After the workpiece is completely
free from the outfeed roller, the depth of cut is
increased and the workpiece is passed through
the planer again. This process continues until the
workpiece is flat and of the correct thickness.
Figure 1. Typical planing operation setup.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Summary of Contents for G0505
Page 40: ......