-42-
G0501 Sliding Table Saw
Figure 71.
Crosscutting workpieces
using the rip fence as a cut-off gauge.
Lastly, this machine has the capability of cross-
cutting workpieces while using the rip fence as a
cut-off gauge (
Figure 71
).
Determine which cutting operation will be best
suited for the workpiece to be crosscut.
— If you will be crosscutting full size panels,
then skip ahead to “Crosscutting full size
panels.”
— If you will be crosscutting smaller panels,
then skip ahead to “Crosscutting smaller
panels.”
— If you will be crosscutting workpieces
using the rip fence as a cut-off gauge,
then skip ahead to “Crosscutting using
the rip fence as a cut-off gauge.”
Figure 70.
Crosscutting smaller panels.
Figure 69.
Crosscutting full size panel.
With the crosscut fence mounted in the forward
position (
Figure 69
), the Model G0501 has the
capability of crosscutting full size panels.
With the crosscut fence mounted in the rear posi-
tion (
Figure 70
), this machine also has the capa-
bility of crosscutting smaller panels.
Crosscutting
Forward Mounted
Crosscut Fence
Rear Mounted
Crosscut Fence