manualshive.com logo in svg

Grizzly EXTREME G0513X2B, Manual

Share
Download
Grizzly EXTREME G0513X2B Manual Download Page 39

G0513X/G0514X/G0514X3 Extreme Series Bandsaw

-9-

The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0514X3

Table Information

Table Length........................................................................................................................................ 26-3/4 in.

Table Width................................................................................................................................................ 19 in.

Table Thickness..................................................................................................................................... 1-1/2 in.

Floor to Table Height............................................................................................................................37-1/2 in.

Fence Information

Locks in Front............................................................................................................................................... Yes

Locks in Rear..................................................................................................................................................No

Adjustable for Blade Lead.............................................................................................................................Yes

Construction

Table Construction...................................................................................................Precision Ground Cast Iron

Rip Fence .................................................................. Cast Iron Fence with Extruded Aluminum Resaw Fence

Base Construction......................................................................................................................... Formed Steel

Body Construction......................................................................................................................... Formed Steel

Upper Wheel........................................................................................................Computer Balanced Cast Iron

Lower Wheel........................................................................................................Computer Balanced Cast Iron

Tire Material................................................................................................................................... Polyurethane

Wheel Cover .......................................................................................................................... Pre-Formed Steel

Paint........................................................................................................................................... Powder Coated

Other Related Information

Wheel Diameter................................................................................................................................... 18-7/8 in.

Wheel Width...........................................................................................................................................1-1/4 in.

Number of Dust Ports........................................................................................................................................2

Dust Port Size.............................................................................................................................................. 4 in.

Other Specifications:

ISO Factory ...................................................................................................................................................ISO 9001

Country Of Origin ..............................................................................................................................................Taiwan

Warranty ............................................................................................................................................................ 1 Year

Serial Number Location ................................................................................................................ Label on Top Cover

Assembly Time .................................................................................................................................................. 1 hour

Features:

Blade Tension Indicator

Micro Adjusting Gear Table

Height Scale Measurement

Fence with Scale and Magnifying Window

Deluxe Cast Iron Fence with Extruded Aluminum Resaw Fence

Miter Gauge

Quick Change Blade Release/Tensioning

Rack and Pinion Upper Guide Adjustment

Includes 3/4" Blade

Summary of Contents for EXTREME G0513X2B









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands