Grizzly ERM 1637 G, Translation Of The Original Instructions For Use

Page: 23 / 144

GB
23
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the ap-
pliance can be found on page 2-4.
Summary
1 Curved handle
2 Start lever
3 Top clamping levers
4 Lower bar
5 Collision guard
6 Bottom clamping levers
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Cable holder
14 Cable strain relief
15 Connection cable
16 Release button (not visible)
17 Power inlet
Assembly
Disconnect the plug before any
work on the equipment. There is a
risk of injury.
Assembling the Curved Handle
Install lower bar:

Slightly spread the ends of the
lower bar (4) and place them on
the threaded bolts on the right
and left of the housing.
‚
Put on the washers from the
package and screw on the bot-
tom clamping levers (6).
ƒ
Tip up the bottom bar (4) to your
favourite angular position.
Lock the bottom clamping levers
(6) by pushing them towards the
bar (4). Clamping levers to be
tightened and contacting the bar
such that they clamp at average
force.
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Attach cable strain relief:
Push the cable strain relief (14)
over the bottom bar (4).
Install curved handle:
1. Use the screws and washers from
the package as well as the top
clamping levers (3) to mount the
curved handle (1) on the right and
left ends of the bottom bar (4).
Three positions are possible.
2. Turn the clamping levers (3)
clockwise.
3. Lock the clamping levers (3)
by pushing them towards the
bar (4). Clamping levers to be
tightened and contacting the bar
such that they clamp at average
force.
Otherwise you may have to
tighten (turn clockwise) or loos-
en them (turn anticlockwise).
Clip on the cable hook:
Clip on the cable hooks ( 13)
to the bottom bar to fasten the
connection cable ( 15).