65
GB
Disposal and protection
of the environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy
-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
• Take the equipment to a waste dis
-
posal site. The plastic and metal parts
that are used can be separated out
into pure grade, which allows recycling.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal house
-
hold waste.
Spare parts/Accessories
Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see “Grizzly Service-Center”).
Guarantee
This appliance has a 24-month guaran
-
tee.
This equipment is not suitable for com
-
mercial use. Commercial use will invali
-
date the guarantee.
Damages, which can be attributed to
natural wear, overloading or inappropriate
use, are excluded from the guarantee.
• Always keep the device clean.
- Remove deposits, grass clippings
or escaping lubricant from the mo
-
tor, air vents and handles. Use a
damp cloth or brush to do this.
Do not use any cleaning agents or
solvents. This could damage the
machine irreparably.
- After each use, clean the cutting at
-
tachments and the protective cover
– if applicable – of contaminants.
- After each use, you
must clean the safety
cutter bar (with an oily
rag) and lubricate it
with an oil can or
spray.
• Prior to every use, check the appli
-
ance for obvious defects such as
loose, worn or damaged parts.
• Check covers and safety devices for
damages and correct installation. Re
-
place as necessary.
• The blade bar must be checked regu
-
larly for wear and reground. A blunt
cutting accessory will overload the
device and has to be replaced.
• Slight notches on the blades can be
evened out. For this, sand down the
blades with an oil stone. Only sharp
blades can cut properly.
• Blunt, bent or damaged blades must
be changed.
Storage
• Clean the device prior to storage.
• Attach the blade guard (
15)
• Store the device in a dry, frost-free,
and dust-protected place and out of
reach of children.
Summary of Contents for EKHS 500-45 2in1
