English
17
For the connection use main cable on the rear panel of the fixture and connect as shown below.
6.5 Replacing the optic groups
The unit can be fitted with different optic groups according to application requirements.
The standard optics is 10°, but 30° and 45° optics are available on request.
Necessary actions to replace the optic groups are shown in the following pictures:
1.
Untighten the 10 front screws
“E”
.
2.
Remove the front panel
“F”
.
3.
Untighten the 6 screws and replace the lens group
“G”.
4. Close the unit again.
6.6 Powering up the unit
Once performed all actions described in the previous paragraphs, you can proceed and power up the unit.
Warning!
Make sure that the front panel gasket is properly positioned in order to avoid water infiltrations into the unit.
F
G
E
Live
Ground
Neutral
Brown
Yellow Green
Blue
Main supply
