16
English
6.3 Adjusting light beam direction
1.
Untighten the lateral screw
“D”
, rotate the body of the unit to-
wards desired direction and tighten the knobs.
2.
Rotate the body of the unit towards desired direction and
tighten the screw
“D”
.
6.4 Connection to mains power
The unit can operate with voltage from 100 to 115Vac and from 200 to 250Vac and with frequency of 50 and 60Hz,
according to the preset by
Griven
.
Refer to the serigraphy onto the rear side of the unit to check
the preset.
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• The unit must never be installed if not grounded electrically.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
AC input:
¢
100/115 V
¢
200/208/220 V
¢
230/240/250 V
¢
50 Hz
¢
60 Hz
D
