4.0 USE OF THE PROJECTOR
The function of the dip-switches will change according to the selected mode
(DMX-SLAVE/ MASTER-AUTOMATIC).
Once the unit is connected to the mains, the LED red light on the circuit board indi-
cates that the digital data is correctly received or that the MASTER mode is acti-
vated. If the LED red light is off, it means that the DMX signal is either absent or not
correctly received.
4.1 MASTER/AUTOMATIC mode
To operate the unit in MASTER/AUTOMATIC mode, you must set the relevant dip-
switch to ON.
Pre-set programs included in the software of the unit can be accessed by adjusting
the DIP-SWITCHES set accordingly (refer to table 1).
14
Tabella 1
12
