14
4.4 DMX cable connection
4.5 MASTER/Slave mode
It is possible to set the units in slave mode to allow them to follow the master unit.
Set the relevant dip-switch (no. 12) to ON for master unit, while all the slave units
must have all the dip-switches se to OFF.
The DMX specifications require an optima terminal resistor (100-120 ohm). The ter-
minal resistor must be placed between the DATA+ and DATA- wires present on the
last unit of the line.
Line
terminal
15
DMX IN/OUT
14
Use 2-pole shielded
cable + hose (GND)
The hose must
not touch the
body
