5
Scaffold & Platform Mode
Release all legs from their locking position, then swing each pair of legs until they are
perpendicular to the platform. See diagram above. To ensure stability, engage gusset
braces by pulling them until they are flat and locked in place. Repeat for all the other
gusset braces. See diagram above.
WARNING: DON’T USE SCAFFOLD/PLATFORM MODE WITH
LEGS FULLY EXTENDED. The inner legs are not designed to
be used in this function.
For Platform Mode, simply pull the handle up from the platform
until it’s fully extended then release the tool tray from its locking position. You can put
the tool tray on the top of the handle, forming a platform.
NOTE: THE WEIGHT CAPACITY FOR THE TOOL TRAY IS 4.5 POUNDS IN THIS MODE.
Hang the hook on the handle, where it can be used to hold tool bags while working on
the platform.
