GB Series
Cecilware
®
2
2
Grindmaster
®
Coffee Brewers
To reduce risk of electrical shock, do not remove side panels. No user-serviceable parts inside. Repair should be
done by authorized service personnel only.
Do not alter or deform the power cord or plug in any way! Altering or deforming the plug may cause electrical
shock or damage unit.
Follow national and local electrical codes.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Do not clean with a water jet or use in an area where a water jet may be used.
Cleaning and maintenance shall be made only by properly trained persons with supervision.
Do not remove shuttle or basket while product is brewing.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
To reduce risk of expolsion or fire, do not use near combustibles.
The appliance is not intended for outdoor use.
Installation of this appliance should be performed by authorized service personnel only. Improper installation
could result in electrocution.
To reduce the risk of electrical shock, unplug the dispenser power cord before repairing or replacing any internal
components of the unit. Before any attempt to replace a component, be sure to check all electrical connections
for proper contact. Only a qualified service technician should perform electrical and mechanical adjustments or
repairs.
Electrically ground the chassis.
Never use the ground conductor as a neutral. This could cause electrocution.
Dangerous electric voltages are present near adjustable components. All adjustments should be performed by
qualified service personnel only.
For your safety and the safety of others, read all warnings and the operator’s manual before installing or using
the product.
DANGER:
This term warns the user of imminent hazard that will result in serious injury or death.
WARNING:
This term refers to a potential hazard or unsafe practice, which could result in serious injury or death.
CAUTION:
This term refers to a potential hazard or unsafe practice, which could result in minor or moderate
injury.
NOTICE:
This term refers to information that needs special attention or must be fully understood.
WARNING
Safety Information
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
This symbol means read the operator manual for important safety information.
This symbol means electrical shock hazard. Failure to follow safety instructions may cause electrical harm.
This symbol means do not use unit with damaged plug or cable or electrical shock hazard may result.
This symbol means hot surface. Contacting hot surfaces may cause burns.
This symbol means mechanical hazard. To avoid mechanical hazards, only qualified service technicians
should open this panel to perform electrical and mechanical adjustments or repairs.
This symbol means electrical shock hazard. To avoid electrical hazards, only qualified service technicians
should open this panel to perform electrical and mechanical adjustments or repairs.
