manualshive.com logo in svg

Grindex 8120.280 Sandy Inox, Installation, Operation And Maintenance Manual

Share
Download
Grindex 8120.280 Sandy Inox Installation, Operation And Maintenance Manual Download Page 8

This marking on the product, accessories or literature indicates that the product

should not be disposed of with other waste at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate these items from other types of waste and

recycle them responsibly to promote the sustainable reuse of material resources.
Waste from electrical and electronic equipment can be returned to the producer

or distributor.

1.7  Spare parts

CAUTION:
Only use the manufacturer’s original spare parts to replace any worn or faulty

components. The use of unsuitable spare parts may cause malfunctions,

damage, and injuries as well as void the warranty.

1.8  Warranty

For information about warranty, see the sales contract.

1  Introduction and Safety

6

8120.280 Sandy Inox Installation, Operation, and Maintenance Manual

Summary of Contents for 8120.280 Sandy Inox













































Reviews:

No comments

Brands by name

Popular brands

Load more brands