Congratulations on your purchase of a Cycle Analyst, the first digital
dashboard and battery monitor designed to the specific requirements
of electric bicycles, scooters, and other small electric vehicles. This
device measures the energy consumption and speed of a vehicle and
displays this information and related statistics on an easy-to-read
backlit LCD screen. When appropriately wired to a motor controller, it
is also capable of imposing a custom speed, current, or low voltage
limit by regulating the throttle signal. We hope that you find it a useful
accessory that optimizes the experience of your electric vehicle.
1. Basic Usage
The Cycle Analyst will turn on automatically when more than 10V
appears across the circuit, and will turn off when this voltage is
removed. The default screen shows five pieces of information that are
most relevant to the rider. This includes three instantaneous
quantities: the voltage of the battery pack, the power output in watts,
and the speed of the vehicle; as well as two accumulated quantities:
trip distance and net amp-hours (Ah) from the battery.
A quick left or right press of the button will scroll through other display
screens of interest, while holding the right button will reset trip
statistics. The second display shows just the electrical information of
the battery pack, including the current in amps.
Additional clicks of the button scroll through a total of seven display
screens, which are discussed in detail in
section 4
.
Press Buttons
to Change Display
Toggles Between
Ah and Distance
2nd Display Screen
3
