Manual UC1 © Grimm Audio
26
6. Menus
The UC1 has many functions, preferences and system
setup items that can be controlled from the menu. To
enter the menu, press the top button with ‘menu’ next
to it on the display. You will see a screen with 6 tabs,
labeled F1 and F2 for Functions, P1, P2 and P3 for
Preferences and S1 for System info. We walk you
through all these settings in the pages below. To move
to the next tab, press the top button ‘next tab’. To exit
the menu, press the bottom button ‘exit’. Note that the
exit button is disabled when an option is selected and
its arrow is blinking. Turn the main dial to select a
function, press to change it, then turn to browse the
options and press again to confirm your choice.
F1 menu
Whenever you enter the menu, the F1 page will be
available first. This page gives access to monitor
functions that are often used.
• Monitor source. You can select all inputs and outputs
here by pressing the main dial briefly (the arrow starts
blinking) and then turning the dial. When you reach the
last source, the order wraps and the first source
appears again. To confirm a choice, press the dial again
(the arrow stops blinking). This item does the same as
press-hold the main button and then turn. The result is
immediately visible in the left top corner of the display,
and the selected source becomes audible.
Grimm LS1 customers, please note that the UC1 cannot
select the analog and digital inputs of the LS1 as a
source. In case you need to access these, please use the
F1 menu.
6.
M
en
us
