Grimac Minigrimac, User Manual

Page: 5 / 17

5
0.5 - POSITION OF STICKERS
Stickers and plates displaying ‘Notices’ and ‘Warnings’ are located on the
machine. Replace them if they become illegible.
0.6 - SAFETY PRECAUTIONS TO BE TAKEN WHEN WORKING ON
THE MACHINE
• Switch off the machine and disconnect it from the electric power supply
before carrying out routine maintenance, special maintenance and general
cleaning operations.
• In or der to ensure that the machine has a long working life, any component
parts should be replaced with original GRIMAC parts by competent Grimac
approved staff.
• After carrying out any kind of maintenance, ensure that all parts of the
machine are in proper working order.
• Repairs to the electrical system must be carried out by properly qualified
service staff and only after the electric power supply has been disconnected
and the plug has been removed from the mains power supply socket
• Never use running water on the machine whilst it is switched on or being
cleaned.
• Never wash the machine with solvents, paint thinners, alcohol, etc. We
recommend the use of warm water and neutral detergent in order not to
damage the internal and external parts of the machine.
0.7 - PRACTICAL TIPS ON MAKING A CUP OF COFFEE
The MINIGRIMAC series coffee machine guarantees you a perfect cup of
coffee because it uses the same professional standard component parts as
those found in coffee machines in bars. Nevertheless, the user must ensure
that the steps prescribed in Section 3 Paragraph 3.2 are strictly adhered to
and in particular the user must ensure that the filter is filled with the correct
amounts of coffee.
The dose inserted in the filter holder (1 or 2 cups) is sufficient for just
one or two cups.
SECTION 0 - INTRODUCTION