15
5.1 - CLEANING
FILTER:
If the machine is used only occasionally, after making the last
cup of coffee, wash the filter. If the filter appears to be worn out, replace it
with an original GRIMAC spare part.
WARNING! the water is dispensed at an extremely high temperature.
Danger of scalding!
This ensures that the filter remains cleaner for longer.
More thorough cleaning should nevertheless be carried out at regular
intervals. Use a screwdriver to prise open (fig. 6). If the filter is worn,
replace it.
TRAY AND GRID:
remove the tray and grid from their seat at regular
intervals to remove traces of spilt liquid.
Use only boiling water to disinfect (fig. 1, ref. 8).
WATER TANK FILTER
(MINIGRIMAC - T): the water tank is fitted with a
filter that is connected to the mains supply pipe and softens the water. On
no account tamper with the filter.
- Clean every 2 months by placing it in a salt and water solution.
- After 3 washes, (6 to 8 months’ use) replace the filter with a new one.
OUTER CASING:
to keep the outer casing clean, use a sponge or cloth
soaked in a specific cleaning liquid (a neutral detergent).
Do not use solvents, abrasive powders, or steel wool.
Replace component parts only with ORIGINAL GRIMAC SPARE PARTS.
These can be obtained from our service centres.
GRIMAC accepts no liability for MINIGRIMAC operating faults that develop
because non original spare parts have been used.
Any repairs must be carried out by one of our service centres.
SECTION 5 - MAINTENANCE
SECTION 6 - SPARE PARTS
Summary of Contents for Minigrimac
Page 16: ...16 2 3 7 8 ...
Page 17: ...17 10 6 4 5 9 ...
