Grimac Minigrimac, User Manual

Page: 13 / 17

13
SECTION 4 - CHECKS AND SERVICING
4.1 - OPERATING FAULTS
The machine may not work because:
- the plug has not been inserted into the mains socket;
- the mains switch has not been pressed;
- the filters are blocked;
- there is no water in the tank (MINIGRIMAC -T);
- there is an obstruction to the mains water supply (MINIGRIMAC -M).
If the above operations have been carried out and the filters are clean
(see 5.1) the machine must be faulty and should therefore be checked by
one of our service centres.
WARNING! Before removing the guards, ALWAYS remove the plug
from the mains socket. Never place hand or objects in the machine
when it is still connected to the power supply.
4.2 - GENERAL SERVICING
POWER CABLE
Check the power cable regularly
and replace if it is worn or
damaged.
Remove the plug from the mains
socket. Remove the wires from
the terminal (located inside the
machine).
Loosen the 3 screws that fix the
terminal to the machine.
Remove the worn cable,
reconnect the wires in the
manner indicated in the drawing.
Reconnect the wires to the
terminal.
Refit the terminal and tighten the
3 terminal screws.
This operation should be
carried out by an authorised
person.
L N