Step 2: Attach Bottom Bowl Handles.
Insert 2 Side Handle Bolts (F) through 2
Metal Washers (B), Bottom Bowl (4) and
thread into Side Handle (11). Tighten with
Phillips screwdriver. Repeat process for
other side handle.
Step 3: Attach Legs.
Before attaching
legs, make sure that one Side Handle is
between the Leg Wheels (5) and one Side
Handle is between the Stationary Legs (6).
Insert 2 Leg Bolts (G) through 2 Metal
Washers (B), Bottom Bowl (4), Leg Bowls
(14) and thread into both Stationary Legs
(6). Partially tighten Bolts. Repeat process
for Wheel Legs (5).
Step 4: Attach Wire Shelf, Wheels, and Ash
Vent.
Align leg holes with ends of Wire Shelf (8).
Slide threaded ends of Wire shelf (8)
through holes in Wheel Legs (5). Slide
Plastic Spacers (A), Wheels (9) and Wheel
Metal Washers (L) onto threaded ends of Wire
Shelf (8). Thread Wheel Lock Nuts ( C )
onto threaded end of Wire Shelf (8) and
partially tighten. Insert other 2 Wire Shelf
(8) ends into holes of Stationary Legs (6).
Check alignment of legs and shelf
and
securely tighten Wheel Lock Nuts ( C) and
Leg Bolts (G) from previous Step 3 with
Phillips screwdriver and adjustable wrench
or pliers.
Attach Ash Vent (15) to Bottom Bowl (4)
by inserting Ash Vent Bolt (K) through
Metal Washer (B), Bottom Bowl (4),
Ash Vent (16) and thread Ash Vent Bolt (K)
into Ash Vent Hex Nut (J).
5
