Grill Zone 143757 User Manual Download Page 19

19

 

GAS HOOK-UP 

6  Open the cylinder valve fully (counterclockwise). 

Use a soapy water solution to check all connections 

for leaks before attempting to light the grill. See 

below. If a leak is found, turn the cylinder valve off 

and do not use the grill until a local LP gas dealer 

can make repairs. 

To disconnect LP gas cylinder: 

1.  Turn the burner valves off. 

2.  Turn the cylinder valve off fully (turn clockwise to 

stop). Detach the regulator assembly from the 

cylinder valve by turning the quick coupling nut 

counterclockwise. 

A cylinder of approximately 12 inches in diameter by 

18-1/2 inches high is the maximum size LP gas cylinder 

to use.

You must use an OPD gas cylinder which offers an 

Overfill Prevention Device. 

This safety feature prevents the cylinder from being 

overfilled which can cause malfunction of the LP gas 

cylinder, regulator and/or grill. In Canada, the LP gas 

cylinder must meet the National Standard of Canada, 

Can CSA –B339, Cylinders, spheres and Tubes for 

Transportation of Dangerous Goods and Commission. 

1. The LP gas cylinder must have a shutoff valve, 

terminating in an LP gas supply cylinder valve outlet 

that is compatible with a Type 1 cylinder connection 

device. The LP gas cylinder must also have a safety 

relief device that has a direct connection with the 

vapor space of the cylinder. 

2. The cylinder supply system must be arranged for 

vapor withdraws. 

3. The LP gas cylinder used must have a collar to protect 

the cylinder valve. 

PROPER PLACEMENT AND CLEARANCE OF GRILL 

Never

 use your gas grill in a garage, porch, shed, 

breezeway or any other enclosed area. Your gas grill is 

to be used 

outdoors only,

 at least 3 feet from the back 

and 2 feet from side of any combustible surface. Your 

gas grill should not be used under overhead combustible 

construction. Do not obstruct the flow of ventilation air 

around the gas grill housing. This outdoor gas grill is not 

intended to be installed in or on recreational vehicles 

and/or boats. 

‡

Never

 connect an unregulated LP gas cylinder to your 

gas grill. The gas regulator assembly supplied with 

your gas grill is adjusted to have an outlet pressure of 

11” water column (W.C.)2.74KPA for connection to an 

LP gas cylinder. 

‡

Replacement regulators and hose assemblies must be 

those specified in this manual. 

‡

Have your LP gas cylinder filled by a reputable 

propane gas dealer and visually inspected and 

re-qualified at each filling. 

‡

a ) Do not store a spare LP gas cylinder under or near

       this appliance. 

‡

  b) Never fill the cylinder beyond 80 percent full.   

‡

  c) If the information in a) and b) is not followed 

exactly a fire causing death or serious injury may 

occur. 

‡

Always keep LP gas cylinders in an upright position. 

‡

Do not store (or) or use gasoline or other flammable 

vapors and liquids in the vicinity of this gas grill. 

‡

Do not subject the LP gas cylinder to excessive heat. 

‡

Never store an LP gas cylinder indoors. If you store 

your gas grill in the garage or other indoor location, 

always disconnect the LP gas cylinder first and store it 

safely outside. 

‡

Place dust cap on cylinder valve outlet whenever the 

cylinder is not in use. Only install the type of dust cap 

on the cylinder valve outlet that is provided with the 

cylinder valve. Other types of caps or plugs may result 

in leakage of propane.   

‡

LP gas cylinders must be stored outdoors out of reach 

of children. 

Disconnected LP gas cylinder must not be stored in a 

building, garage or any other enclosed area. 

Summary of Contents for 143757





























Reviews: