GridConnect CAN USB-232, User Manual

Page: 51 / 65

Getting Started
CAN USB-232 User Manual 2-43
2.10.2 Setting Up Message Filters
To use message filtering, each filter used must be enabled and then configured as to the type of filtering that
is desired. All of these parameters are configured during the configuration process.
A filter is configured in the following order:
1) Enable the filter
2) Specify if standard or extended and if single ID or ID range.
Once all configuration parameters have been saved and the CAN USB-232 enters the normal operating
mode, the new filter settings will become active and will be applied to each received CAN message.
2.10.3 Get CAN Filter
The list can be viewed with the ‘get can filter’ command.
The list is sorted in ascending order.
Each entry is assigned an index number starting from zero.
The index number is used to identify an entry for deletion.