Troubleshooting
2-12
CAN USB-232 User Manual
For the CAN-USB version, power is supplied by the USB connection. D8 is the Power LED.
2.2.7 Isolated Power Option
Both the CAN-USB and CAN-232 can be configured for the Isolation option. Non-isolated units do not
have U3 installed. Jumpers J3 and J4 are used to 5 and ground to the output circuits.
For isolation, U3 is installed and jumpers J3 and J4 are removed. U3 is a DC-DC converter that isolates the
two power circuits.
The DC/DC converter is typically used in general purpose power isolation and voltage matching
applications, and feature a full industrial operating temperature range of -40°C to +85°C without derating.
The device is 2kVDC rated in a UL94V-0 package.
Note: The isolated option must be selected at the time the unit is ordered. This is not a field upgrade option.
2.2.8 OEM Options
The OEM version comes without a USB or RS232 cable. It is designed to be part of an embedded product.
Instead of a cable connector, a 10-pin header is used to connect the signals to an OEM circuit board.
The CAN signals are brought out to the OEM connector at J11. The OEM connector is a 10-pin header
soldered to the bottom side of the board.
The RS232 signals are brought out to the OEM connector at J10. Power can be supplied through pin 1 and
Ground is tied to pin 9. J8 must also be jumpered between pins 1 and 2. (See Power Options for J8)
Summary of Contents for CAN USB-232
