DT-7000K20-501 ATM User
Manual
Confidential material of GRG, No disclosure to unauthorized Party
50
(1)
Use a damp lint-free cloth to clean the surface of the fascia and exterior panels.
(2)
Use a dry lint-free cloth to wipe up the surface of the fascia and exterior panels.
(3)
Paint, grease or dirt can be removed by a light application of cotton wadding dampened with
ethyl alcohol.
Note:
To preserve the appearance of your machine, a non-abrasive car wax may be applied to the
grey areas of the fascia.
When cleaning the exterior surface:
(1)
Do not use an abrasive, acid, alkaline or chlorinated cleaner.
(2)
Do not scrape the surface with the scouring pads, razor blades or similar implements.
(3)
Do not use any of the following cleaning articles:
Benzene
Petrol
Acetone
Carbon tetrachloride
Paint stripper of any kind
(4)
Keypads vandalized by paint should not be cleaned, the keypad should be replaced.
3.4.
How to Clear the Head of Card Reader
To clean the head of the card reader you will require a cleaning card.
Firstly, apply a little cleaner on the cleaning card, in normal mode, when the monitor displays:
Please insert your card, proceed as follows:
(1)
Insert the cleaning card.
(2)
Wait for the card to eject.
(3)
Repeat the procedures 10 times.
Note:
If you see the prompt: Sorry, invalid card, neglect it.
4.
Monthly Maintenance
4.1.
Monthly Maintenance Procedures
4.1.1.
Clean the interior of the machine
In the course of use, the interior of the machine would unavoidably become smudgy, so it is
recommended that the interior be cleaned monthly.
4.1.2.
Cleaning articles include:
lint-free cloth, general surface cleaner or a dilute detergent solution.
4.2.
Procedures for cleaning:
(1)
Use a dry lint-free cloth to wipe up the surface of the interior.
(2)
Use a lint-free cloth dampened with cleaner to clean the paint or grease on the spray-powder
Summary of Contents for DT-7000K20-501
Page 71: ...62 ...
