GENERAL NOTES ABOUT RIDING
16
Adjusting the high
speed compression
To adjust, turn the black coloured adjuster
on the side of the cylinder head.
POSITION
:
1
Soft,
2
Medium,
P
Pedaling platform
You can find more info about Ohlins rear
suspensions at
Front suspension
Setting the sag is a crucial part of setting up your bicycle since it affects the height of the
bicycle and the fork angle. In the following chapter we will describe how to set the sag. This
procedure must be performed on a flat surface. Do not jump or bounce on your bicycle as it
will result in an inaccurate sag measurement.
Setting the sag
Unscrew the cap of the lower valve (ramp up
chamber) and assemble the air pressure pump.
Pump to desired pressure. Disconnect the pump
and put the cap back on. As the air pressure or
spring rate increases, the extension/return speed
increases. To achieve the optimal setting, rebound
damping may need to be increased when air
pressure or spring rate increases.
Unscrew the top air cap (Main chamber) and
assemble the air pump. Pump to desired pressure.
Disassemble the air pump and reinsert the
compression air cap.