TIANJIN GREWIN TECHNOLOGY CO.,LTD.
Web:www.grewin-tech.com Wh86-13072088960
Email:[email protected]
Address:DongLi Distr Tianjin City, China
Tel:
+86-22-84943756
11
Internal file: choose the files stored in the device
USB file: Chose the files stored in the USB disk, valid when insert the USB disk
USB usage: indicates the files storage in the device. If reach 100%, new waveform can’t be logged. Delete old waveform before store new
waveform.
2.4.6 Parameter setting
Operate below steps:
Operate
—
System setting, pope window appears as below Fig.2.12
It’s for impulse current delay setting, multiple impulse delay and date setting.
Steps as below:
Click the parameters need to modify
Use the number keyboard to modify the parameter value
Click the OK to confirm the modify
2.4.7 Delay adjustment
When use the impulse current mode and the multiple impulse mode to test, it is needed to adjust the delay. Details refer following captor.
2.4.8 Exit testing
When use the impulse current mode and the multiple impulse mode to test, press
Test button to enter the triggering condition. Press this
button again to exit.
2.4.9 Waveform movement
Move the cursor to the left end of the waveform, then continue to move to the left, the waveform will move to right for half screen. Similar as in
the right operation.
2.4.10 Cursor movement
Under the normal mode, move the cursor position through
○
5 Multiple function button.
Left and right button is used for cursor movement.
Long time press to move fastly, short time press to pinpointing.
Fig.2.12 System setting windows introduction